| 加工定制：是 | 品牌：AB | 型号：871AS-TS3-N2 |
| 种类：光电 | 制作工艺：集成 | 输出信号：开关型 |
| 材料：金属 | 材料物理性质：半导体 | 材料晶体结构：单晶 |
Installation Select the location for sensor mounting. Ensure that the target to sensor clearance is approximately 6.4 mm (0.25 in.), the sensor is at least 51mm (2 in.) away from other proximity sensors, and there are no metal objects adjacent to the sensor&＃39;s face or sides that may distort the sensing field. Mount the sensor using 871A-BR58 sensor bracket mounting assembly or other suitable bracketing. Route the sensor&＃39;s 4-conductor cable to a junction box. Connect the cabling to the load device according to the appropriate wiring diagram. Note that the maximum load current for either NPN or PNP output is 300mA. The PNP (voltage source) output level tracks the DC input voltage level. Apply power to the sensor. Turn the Motion Adjust potentiometer to its full counterclockwise position. Position containers in front of the sensor as shown at right, depending on the conveyor system to be used. Adjust the position of the sensor forward until the output LED is on and brightly lit. Start the conveyor and run at normal line speed. Adjust the Motion Adjust potentiometer clockwise so that the sensor is detecting the peaks of the container and not the valleys. The motion LED should flash dimly for each passing container. If the LED fails to blink for each container, adjust the Motion Adjust potentiometer clockwise or position the sensor closer to the containers. If the LED remains on, turn the Motion Adjust potentiometer counterclockwise or position the sensor farther from the containers. Stop the conveyor with containers in front of the sensor. The LED should turn on brightly after 0.5 seconds. If the output LED fails to turn on, adjust the position of the sensor inward until the LED
罗克韦尔AB管状感应式接近传感器是自成体系的固态开关设备。它们无需接触就能感知金属物体（黑色金属和有色金属）的存在
871C 管状模拟量传感器是自成体系的通用固态设备，设计为无需接触即可感知黑色金属和有色金属物体的存在。这些特殊版本可提供 0 至 10V 的源电流模拟量输出，输出与感应距离成比
罗克韦尔AB传感器：871系列低压产品；接近开关及传感器配件 817-E1
817-E2 热敏电阻
美国AB传感器：用于罐装的矩形传感器
用于罐装的 Bulletin 871P 矩形传感器专门设计用于在无物理接触的情况下感应尺寸为 202 至 704 的金属罐。从功能和环境等级而言，这些传感器是为罐装工业量身定做的。短距和长距型号提供交流和直流两种版本。为需要罐移动感应的应用提供直流供电型号.
提供用于检测罐的运动或只是检测罐是否存在的型号
短路、过载、瞬时噪声、假脉冲和反极性防护
不锈钢外壳
NEMA 6P、IP67 外壳
1200 psi (8270 kPa) 冲洗
871P-AC29N140-N3
871P-B20C40-N3
871P-B20C40-R3
871P-B20N40-N3
871P-B20N40-R3
871P-B40C40-R3
871P-B40N40-N3
871P-B40N40-R3
871P-BV15N40-N3
871P-BV15N40-R3
871P-BV25N40-N3
871P-BV25N40-R3
871P-BW15C40-N3
871P-BW15C40-R3
871P-BW15N40-N3
871P-BW15N40-R3
871P-BW25C40-N3
871P-BW25C40-R3
871P-BW25N40-N3
871P-BW25N40-R3
871P-DB25CN40-D4
871P-DB25CN40-N4
871P-DB25CP40-D4
871P-DB25CP40-N4
871P-DB25NN40-D4
871P-DB25NN40-N4
871P-DB25NP40-D4
871P-DB25NP40-N4
871P-DC19NB76-N4
871P-DC29NB140A2
871P-DC29NB140N4
871P-DD29NB140A2
871P-DD29NB140N4
871P-MB15BP40JD4
871P-NB35BP40JD4
871P-NB35BP40KD4
871T-L5J18
871T-L8B18
